[cisco-voip] Cisco CME On HOld Command

[Lelio Fulgenzi]

If you have an analog phone attached to a VG224 or VG248 then there are feature codes you can program. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Ahmad Riaz" <lunaticark at yahoo.com> 
To: cisco-voip at puck.nether.net 
Sent: Monday, July 13, 2009 8:23:16 AM GMT -05:00 US/Canada Eastern 
Subject: [cisco-voip] Cisco CME On HOld Command 

Dear Sir, 
is their any command which hold an active call and without pressing hold button. 


Take Care 
Ahmad Riaz Kazmi 
Cell 0333-6367692 
Ext # 4234 
ICOM-LHR 

_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090713/79e2b6b0/attachment.html>