[cisco-voip] R: Re: R: Error: DeviceTransientConnection - Transient connection attempt.

Tue Jul 14 11:58:08 EDT 2009

Thanks for clarification.
On friday I'll make configuration and answer if it's working.

Marco Parmigiani
Cell. 335/6029722
Email. Parmigiani at digipoint.it

----- Messaggio originale -----
Da: Ryan Ratliff <rratliff at cisco.com>
A: Parmigiani Marco
Cc: cisco-voip at puck.nether.net <cisco-voip at puck.nether.net>
Inviato: Tue Jul 14 17:43:42 2009
Oggetto: Re: R: [cisco-voip] Error: DeviceTransientConnection - Transient connection attempt.

That's correct.

-Ryan

On Jul 14, 2009, at 11:05 AM, Parmigiani Marco wrote:

Thanks Ryan,

do you mean that I've to had a new cisco 2821 SCCP with same Ip  
address as already defined H.323 Gateway ?

Thanks
Marco

________________________________

Da: Ryan Ratliff [mailto:rratliff at cisco.com]
Inviato: mar 14/07/2009 17.02
A: Parmigiani Marco
Cc: cisco-voip at puck.nether.net
Oggetto: Re: [cisco-voip] Error: DeviceTransientConnection -  
Transient connection attempt.

If you are using sccp to control the ports on the router you need to
have the gateway defined in CUCM as such.

-Ryan

On Jul 12, 2009, at 5:10 PM, Parmigiani Marco wrote:

Hi,

I've 3 CCM version 4.2(3)sr3 at headquarter and 30 Remote Sites with
Cisco SRST Routers.

I'm trying to configure FXS ports on cisco 2821 SRST to be managed
via SCCP on Cisco Call Manager 4.2.3 but I receive following error
message on Cisco Call Manager:

Error: DeviceTransientConnection - Transient connection attempt.

                  Connecting Port: 2000

                  Device name [Optional].: AN1BD50FDE00401

                  Device IP address.: x.x.x.x

                  Device type. [Optional]: 30027

                  Reason Code [Optional]: 1

                  App ID: Cisco CallManager

                  Cluster ID: "Cluster-Name"

                  Node ID: y.y.y.y

Cisco SRST Router 2821 on Cisco Call Manager is configured as H.323
Gateways.

-          FXS Module installed on the router 2821 is Voice VM-8FXS/
DID  Port adapter (by show diag command):

-          IOS Router version 12.4(15)T9 (C2800NM-SPSERVICESK9-M),

-          SCCP Configuration on SRST Routers:

stcapp ccm-group 1

stcapp

!

voice-port 2/0/1

   echo-cancel coverage 32

   compand-type a-law

   playout-delay nominal 100

   playout-delay mode fixed

   cptone IT

   timeouts interdigit 8

   timeouts ringing infinity

   timing hookflash-in 250 0

   caller-id enable

!

!

sccp local BVI2

sccp ccm IP-CCM1 identifier 1 version 4.1

sccp ccm IP-CCM2 identifier 2 version 4.1

sccp ccm IP-CCM3 identifier 3 version 4.1

sccp ccm IP-SRST  identifier 4

sccp

!

sccp ccm group 1

   associate ccm 3 priority 1

   associate ccm 2 priority 2

associate ccm 1 priority 3

associate ccm 4 priority 4

!

!

dial-peer voice 241 pots

   service stcapp

   port 2/0/1

!

Thanks in advantage

Marco Parmigiani

Cisco CCSI CCDP CCNP CCSP

Check Point CCSI CCSA CCSE NGX CCSE+ NG

CompTIA CTT+

* parmigiani at digipoint.it

( +39 010 6018363

2  +39 010 6014091

È+39 335 6029722

Digipoint srl

Corso Perrone, 25r

16152 Genova - Italy

http://www.digipoint.it <http://www.digipoint.it/>

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

L'utilizzo non autorizzato del presente messaggio è vietato e  
potrebbe costituire reato. Se il presente messaggio non e' a Lei  
indirizzato, Le saremmo grati se, via e-mail, ne comunicasse l'errata  
ricezione. Il contenuto del presente messaggio non deve essere  
considerato come trasmesso o autorizzato da digipoint s.r.l.  
digipoint s.r.l. non si assume alcuna responsabilità per eventuali  
intercettazioni, modifiche o danneggiamenti del presente messaggio e- 
mail. Grazie per la collaborazione. Privacy policy http:// 
www.digipoint.it/privacy.asp

This message and any attachment are confidential and may be  
privileged or otherwise protected from disclosure. If you are not the  
intended recipient, please return the email to the sender and delete  
this message and any attachment from your system. If you are not the  
intended recipient you must not copy this message or attachment or  
disclose the contents to any other person. Email messages may be  
monitored and/or recorded by digipoint s.r.l.. Thank you for your co- 
operation. Privacy policy http://www.digipoint.it/privacy.asp

L'utilizzo non autorizzato del presente messaggio è vietato e potrebbe costituire reato. Se il presente messaggio non e' a Lei indirizzato, Le saremmo grati se, via e-mail, ne comunicasse l'errata ricezione. Il contenuto del presente messaggio non deve essere considerato come trasmesso o autorizzato da digipoint s.r.l. digipoint s.r.l. non si assume alcuna responsabilità per eventuali intercettazioni, modifiche o danneggiamenti del presente messaggio e-mail. Grazie per la collaborazione. Privacy policy http://www.digipoint.it/privacy.asp 

This message and any attachment are confidential and may be privileged or otherwise protected from disclosure. If you are not the intended recipient, please return the email to the sender and delete this message and any attachment from your system. If you are not the intended recipient you must not copy this message or attachment or disclose the contents to any other person. Email messages may be monitored and/or recorded by digipoint s.r.l.. Thank you for your co-operation. Privacy policy http://www.digipoint.it/privacy.asp 