[cisco-voip] Caller ID on E&M trunk and CUCM 6.1

[Nick Matthews]

http://www.cisco.com/en/US/docs/ios/12_1t/12_1t1/feature/guide/anidnis.html

To be more clear, the ISRs can do this but it requires TCL scripting.
I don't have a copy, but you may be able to find it somewhere.

"This feature allows the Cisco AS5300 and Cisco AS5800 universal
access servers to provide the ANI/DNIS delimiter on incoming T1/CAS
trunk lines. "


-nick

On Tue, Jul 14, 2009 at 10:12 AM, Erick Bergquist<erickbee at gmail.com> wrote:
> Thanks, Is there any cisco docs on the 5x00 only doing *ani*dnis* ?
>
> I did find this URL which does mention FGD is needed.
>
> http://supportwiki.cisco.com/ViewWiki/index.php/Automatic_number_information/_Dialed_number_identification_service_display_support_for_E&M_connections_with_T1_CAS_for_outbound/incoming_calls_on_an_H.323_IOS_gateway
>
>
> On Mon, Jul 13, 2009 at 10:29 PM, Nick Matthews<matthnick at gmail.com> wrote:
>> The *ani*dnis* format is only supported on the 5x00 platforms.  ISR
>> platforms do not have this capability.
>>
>>
>> -nick
>>
>> On Mon, Jul 13, 2009 at 5:12 PM, Erick Bergquist<erickbee at gmail.com> wrote:
>>> Does anyone know which E&M configuration supports ANI on a E&M trunk
>>> in *ani*dnis* format with CUCM 6.1?  I've looked over several docs on
>>> cisco and previous posts here and it looks like we need E&M Feature
>>> Group D. The gateway is currently setup as H.323 with following
>>> controller T1 setup.
>>>
>>> controller T1 0/0/0
>>>  framing esf
>>>  linecode b8zs
>>>  ds0-group 1 timeslots 1-24 type e&m-wink-start dtmf dnis
>>>
>>> Thanks.
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>
>