[cisco-voip] Caller ID on E&M trunk and CUCM 6.1

[Erick Bergquist]

Thanks, Is there any cisco docs on the 5x00 only doing *ani*dnis* ?

I did find this URL which does mention FGD is needed.

http://supportwiki.cisco.com/ViewWiki/index.php/Automatic_number_information/_Dialed_number_identification_service_display_support_for_E&M_connections_with_T1_CAS_for_outbound/incoming_calls_on_an_H.323_IOS_gateway


On Mon, Jul 13, 2009 at 10:29 PM, Nick Matthews<matthnick at gmail.com> wrote:
> The *ani*dnis* format is only supported on the 5x00 platforms.  ISR
> platforms do not have this capability.
>
>
> -nick
>
> On Mon, Jul 13, 2009 at 5:12 PM, Erick Bergquist<erickbee at gmail.com> wrote:
>> Does anyone know which E&M configuration supports ANI on a E&M trunk
>> in *ani*dnis* format with CUCM 6.1?  I've looked over several docs on
>> cisco and previous posts here and it looks like we need E&M Feature
>> Group D. The gateway is currently setup as H.323 with following
>> controller T1 setup.
>>
>> controller T1 0/0/0
>>  framing esf
>>  linecode b8zs
>>  ds0-group 1 timeslots 1-24 type e&m-wink-start dtmf dnis
>>
>> Thanks.
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>