[cisco-voip] Caller ID on E&M trunk and CUCM 6.1

[Nick Matthews]

The *ani*dnis* format is only supported on the 5x00 platforms.  ISR
platforms do not have this capability.


-nick

On Mon, Jul 13, 2009 at 5:12 PM, Erick Bergquist<erickbee at gmail.com> wrote:
> Does anyone know which E&M configuration supports ANI on a E&M trunk
> in *ani*dnis* format with CUCM 6.1?  I've looked over several docs on
> cisco and previous posts here and it looks like we need E&M Feature
> Group D. The gateway is currently setup as H.323 with following
> controller T1 setup.
>
> controller T1 0/0/0
>  framing esf
>  linecode b8zs
>  ds0-group 1 timeslots 1-24 type e&m-wink-start dtmf dnis
>
> Thanks.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>