[cisco-voip] In CallManager 7.1 globally enabled peer firmware sharing?

[Ryan Ratliff]

To correct myself in this case there is no "default" option but the  
Common Phone Profile does allow you to bulk set some of the Product  
Specific configurations.  Peer firmware sharing is included.  This is  
in 7.1(2) as I don't have a 7.0 server to check.

-Ryan

On Jul 14, 2009, at 2:26 PM, Ryan Ratliff wrote:

As a general rule on the phone if there is a "default" option for a  
parameter then there will be a corresponding global parameter.  If  
there is no option for "default" then you can bet there is no global  
setting.

-Ryan

On Jul 14, 2009, at 12:32 PM, Jason Aarons (US) wrote:

Is there a enterprise/service parameter to globally enabled peer  
firmware sharing under Device > Phone > Product Specific  
Configuration Layout ?


Disclaimer: This e-mail communication and any attachments may contain  
confidential and privileged information and is for use by the  
designated addressee(s) named above only. If you are not the intended  
addressee, you are hereby notified that you have received this  
communication in error and that any use or reproduction of this email  
or its contents is strictly prohibited and may be unlawful. If you  
have received this communication in error, please notify us  
immediately by replying to this message and deleting it from your  
computer. Thank you.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip