[cisco-voip] Voice source group

[Jeremy Rogers]

What I need to do is take calls hitting an AS5400 via SIP and have them route to a specific POTS dial peer out to the PSTN.

Jeremy Rogers
Network Management
IPsoft, Inc.
Jeremy.Rogers at ip-soft.net<mailto:Jeremy.Rogers at ip-soft.net>
Phone: 888.IPSOFT8
http://www.ipsoft.com


From: Voice Noob [mailto:voicenoob at gmail.com]
Sent: Wednesday, July 15, 2009 4:46 PM
To: Jeremy Rogers; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Voice source group

Don't know about that but you could match their extension range on an incoming dial-peer and add a different access code to the begging of the dialed number with a translation rule. Then have a set of dial-peers that matches that access code.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jeremy Rogers
Sent: Wednesday, July 15, 2009 3:03 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Voice source group


Can I use the voice source-group command to route traffic coming from specific 172.16.x.x addresses to specific POTS dial peers?

Jeremy Rogers
Network Management
IPsoft, Inc.
Jeremy.Rogers at ip-soft.net<mailto:Jeremy.Rogers at ip-soft.net>
Phone: 888.IPSOFT8
http://www.ipsoft.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090715/6d8a7de4/attachment.html>