[cisco-voip] Voice source group

[Voice Noob]

Never tried to match on subnet. Good luck.

 

From: Jeremy Rogers [mailto:Jeremy.Rogers at ip-soft.net] 
Sent: Wednesday, July 15, 2009 3:48 PM
To: Voice Noob; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Voice source group

 

What I need to do is take calls hitting an AS5400 via SIP and have them
route to a specific POTS dial peer out to the PSTN.

 

Jeremy Rogers

Network Management

IPsoft, Inc.

Jeremy.Rogers at ip-soft.net

Phone: 888.IPSOFT8

http://www.ipsoft.com

 

 

From: Voice Noob [mailto:voicenoob at gmail.com] 
Sent: Wednesday, July 15, 2009 4:46 PM
To: Jeremy Rogers; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Voice source group

 

Don't know about that but you could match their extension range on an
incoming dial-peer and add a different access code to the begging of the
dialed number with a translation rule. Then have a set of dial-peers that
matches that access code.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jeremy Rogers
Sent: Wednesday, July 15, 2009 3:03 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Voice source group

 

Can I use the voice source-group command to route traffic coming from
specific 172.16.x.x addresses to specific POTS dial peers?

 

Jeremy Rogers

Network Management

IPsoft, Inc.

Jeremy.Rogers at ip-soft.net

Phone: 888.IPSOFT8

http://www.ipsoft.com

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090715/9104bded/attachment.html>