[cisco-voip] Problems with a VoIP dial-peer

[Mike Thompson]

Can u add the remote site dial plan config please?

Sent from my phone, apologies for any typos.

On Jul 15, 2009, at 3:43 PM, "Billy Seale" <billys at dakota2k.com> wrote:

> I’m having an issue with a VoIP dial peer from one CME router to ano 
> ther.
>
>
>
> !
>
> dial-peer voice 100 voip
>
>   destination-pattern 1...
>
>  session protocol sipv2
>
>  session target ipv4:192.168.167.2
>
>  dtmf-relay sip-notify
>
>  codec g711ulaw
>
>  no vad
>
> !
>
> dial-peer voice 6000 voip
>
>  destination-pattern 6...
>
>  session protocol sipv2
>
>  session target ipv4:192.168.166.250
>
>  dtmf-relay sip-notify
>
>  codec g711ulaw
>
>  no vad
>
> !
>
>
>
> As you can see I have two dial peers.  The 1xxx is for extensions on  
> the remote CME and the 6xxx is the Unity Express on the same remote  
> router.  The issue I’m having is that sometimes the 1xxx dial peer w 
> orks just fine and then others I get a fast busy along with an unkno 
> wn extension error.  The 6xxx dial peer works always.  The remote ro 
> uter never has any issues calling extensions on this router.  Any su 
> ggestions on what maybe causing this?
>
>
>
>
>
> Thank you,
>
>
>
> Billy Seale
>
> Network Engineer
>
> CCNA, CWNA, DCSE, CIPTX
>
>
>
> Dakota 2000
>
> “The future of communications”
>
> 207 E. Missouri Avenue, Pierre, SD 57501
>
> Phone – (800) 747-6427   Fax – (605) 945-2200
>
>  www.dakota2k.com
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090715/87a37a9b/attachment.html>