[cisco-voip] TAPS with phone/bat that has multiple lines

[Mike Lydick]

So for the list,

Multiple lines on a phone can be TAP'd but shared lines (Shared Line
Appearance) will not. Additional, Overlapping Directory Numbers will not
work regardless of the partitioning.


Best Regards,

Mike Lydick



On Wed, Jul 15, 2009 at 9:13 PM, Jason Aarons (US) <
jason.aarons at us.didata.com> wrote:

>  I have some 7961s with multiple lines, can I BAT them with dummy mac and
> all DNs and use TAPS?  Any restrictions on what TAPS can do?
>
> ------------------------------
>
> * Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090716/74ded35c/attachment.html>