[cisco-voip] In CallManager 7.1 globally enabled peer firmwaresharing?

[Jason Aarons (US)]

If only the web page said that.  I set it to enable after looking at it
and thought I was good to go!! Bummer.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Burns
Sent: Thursday, July 16, 2009 12:07 PM
To: Ryan Ratliff
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] In CallManager 7.1 globally enabled peer
firmwaresharing?

 

After looking at this web page some more I've realized it doesn't
actually work yet. It's meant for future versions of IP Phones that I
don't have any information about.

It doesn't currently do anything, so just ignore it for now. Same with
Common Phone Profile. The top settings box works, but the Product
Specific box doesn't do anything yet.

Keeping all that in mind, the best current method to update these
Product Specific settings is still with BAT.

On Wed, Jul 15, 2009 at 11:45 AM, Jason Burns <burns.jason at gmail.com>
wrote:

In 7.1.2 you can go to:

System > Enterprise Phone Configuration 

and you'll see an option for "Peer Firmware Sharing".

You can even check a box that says "Override Common Settings".

This "Enterprise Phone Configuration" looks like a new feature for me,
and should allow you to globally enable peer firmware sharing. You can
also configure a bunch of other options globally from that page.

 

On Wed, Jul 15, 2009 at 9:56 AM, Ryan Ratliff <rratliff at cisco.com>
wrote:

To correct myself in this case there is no "default" option but the
Common Phone Profile does allow you to bulk set some of the Product
Specific configurations.  Peer firmware sharing is included.  This is in
7.1(2) as I don't have a 7.0 server to check.

-Ryan



On Jul 14, 2009, at 2:26 PM, Ryan Ratliff wrote:

As a general rule on the phone if there is a "default" option for a
parameter then there will be a corresponding global parameter.  If there
is no option for "default" then you can bet there is no global setting.

-Ryan

On Jul 14, 2009, at 12:32 PM, Jason Aarons (US) wrote:

Is there a enterprise/service parameter to globally enabled peer
firmware sharing under Device > Phone > Product Specific Configuration
Layout ?


Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090716/e40f8568/attachment.html>