[cisco-voip] how to reduce dial-peer failover/hunting time?

[Craig Staffin]

For H323

You will need to setup a H323 class and setup a max timout command of 2 or 3
secconds then apply this to the dial peer

So setup

Voice class H323 1
timeout 3 (I can't remember the exact command off the top of my head)

Dial peer 10 voip
voice class h323 1

Craig


On Thu, Jul 23, 2009 at 5:42 AM, ciscozest <ciscozest at gmail.com> wrote:

> I have three dial-peers setup on CME 4.2 router
>
> first dial-peer is pointing to CCM Subscriber SIP trunk (VoIP)
> second dial-peer is pointing to CCM Publisher SIP trunk (VoIP)
> third dial-peer is pointing to PSTN  (POTS)
>
>
> When both of CCM servers are down, it took very long time to use the third
> dial-peer and establish the call. Is there a way to reduce the dial-peer
> hunting or failover in the above scenario? Appreciate if anyone can share
> your thought. Thank you
>
> regards,
> Denny
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090723/7bd9a026/attachment.html>