[cisco-voip] FW: CUOM supporting HP Procurve - CDP MIBS

[Go0se]

Using non Cisco switches with Cisco phones is like having a Cadillac
Escalade with wagon wheels on it instead of tires. It might get you around
but you will have a ton of headaches from the ride.

 

Later,

 

Go0se

http://atc.go0se.com

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voice Noob
Sent: Monday, July 27, 2009 8:28 AM
To: 'Subhrojyoti Banerjee'; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] FW: CUOM supporting HP Procurve - CDP MIBS

 

Use cisco switches. Problem solved. The cost is about $500 more list for a
cisco 2960 then the HP equivalent. 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Subhrojyoti
Banerjee
Sent: Monday, July 27, 2009 7:19 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] FW: CUOM supporting HP Procurve - CDP MIBS

 

Hi All,

I'm not sure if this would be the right forum but thought would try my luck
just in case if someone had some experience or ideas. Customer wants to
replace his Access layer switches with HP ProCurve products. We hope to
replace their edge switches with HP ProCurve 2910al product (or 3500yl
alternatively). 

A potential showstopper is Cisco Unified Operations Manager (CUOM) not
supporting ProCurve switches. We need to have it map Cisco VoIP phones to
the switch ports. As far as  we could see, the 2910al does support the
Cisco-CDP MIBS and propagates the connected Phones. However we didn't manage
to get CUOM to support the 2910al in that respect. 

Does anyone know of a workaround for CUOM to support the above products or
may be how it organizes switch support in general (particularly having Cisco
IPT's connected)? 

Thanks in advance,

Regards,
Subhrojyoti

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090727/dcd2e184/attachment.html>