[cisco-voip] CME Silent Ring Feature

[Mike Thompson]

As Patrick pointed out...in CME (as with many things, a la paging) it's
actually a built in feature versus the 'hoops' you have to go thru for CUCM.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Patrick Diener
Sent: Monday, July 27, 2009 10:01 AM
To: svr.file at gmail.com; cisco-voip
Subject: Re: [cisco-voip] CME Silent Ring Feature

you can achieve silent ring (or other line behavior for that matter)
by using a different operator to assign the ephone-dn to a ephone with
the button command e.g.

button 1:1 (: is the operator for "normal ring")

button 1s1 (s is the operator for "silent ring")

check out the command reference for a list of all operators allowed
with the button command:
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/command/referenc
e/cme_b1ht.html#wp1024742

Regards
Patrick


On Mon, Jul 27, 2009 at 3:02 PM, svr.file at gmail.com<svr.file at gmail.com>
wrote:
> Hi All,
>
> I'm trying to find out some more information on the CME feature for Silent
> Ringing.
>
> Is it possible to configure a Silent Ringer in CME as you can in CM?
>
> Thanks.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip