[cisco-voip] H323 gateway and SRST

[Mike O]

Hey all, I have a question around SRST mode. I have a situation where I am currently using a 2811 in H323 mode to a Call Manager v7 with the following dial peers.

dial-peer voice 3000 voip
 destination-pattern 3...
 voice-class h323 1
 session target ipv4:192.168.203.10
 incoming called-number .
 dtmf-relay h245-alphanumeric
 codec g711ulaw

dial-peer voice 999 pots
 incoming called-number .
 direct-inward-dial
 port 0/0:23

When I go into SRST mode I need all calls translated to 3101, but if I put a translation pattern on dial-peer 999 it will translate all calls while not in SRST mode.

Any ideas? the only one I can think of is to make the gateway MGCP but its forbidden.

Thanks,

Mike

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090727/65671a4a/attachment.html>