[cisco-voip] H323 gateway and SRST

[Cristobal Priego]

You can use the alias command under call-manager-fallback or the  
deault-destination commad


Sent from my iPhone

On Jul 27, 2009, at 5:47 PM, "Mike O" <mikeeo at msn.com> wrote:

> Hey all, I have a question around SRST mode. I have a situation  
> where I am currently using a 2811 in H323 mode to a Call Manager v7  
> with the following dial peers.
>
> dial-peer voice 3000 voip
>  destination-pattern 3...
>  voice-class h323 1
>  session target ipv4:192.168.203.10
>  incoming called-number .
>  dtmf-relay h245-alphanumeric
>  codec g711ulaw
>
> dial-peer voice 999 pots
>  incoming called-number .
>  direct-inward-dial
>  port 0/0:23
>
> When I go into SRST mode I need all calls  translated to 3101, but  
> if I put a translation pattern on dial-peer 999 it will translate  
> all calls while not in SRST mode.
>
> Any ideas? the only one I can think of is to make the gateway MGCP  
> but its forbidden.
>
> Thanks,
>
> Mike
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090727/f13e70e5/attachment.html>