[cisco-voip] Can Unity Voicemail 5x transfer direct to voicemail without ringing phone...

[Voice Noob]

This is also the case with Unity Connection 7.X

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Pat Hayes
Sent: Tuesday, June 02, 2009 5:24 PM
To: Richard Humphries
Cc: cisco-voip
Subject: Re: [cisco-voip] Can Unity Voicemail 5x transfer direct to
voicemail without ringing phone...

Unity 4.2 and later with a sccp integration should have this taken
care of, if Unity notices a change in the media (as will happen when
completing a transfer), it will restart the user's greeting for the
new connected party. No need to add fixed delays.

On Tue, Jun 2, 2009 at 4:10 PM, Richard Humphries
<Richard.Humphries at aos5.com> wrote:
> What I have done is enabled message monitor, this throws in about a two
> second delay there so you can hit the transfer key a second time.
> Unfortunately the delay will appear for all calls going to a subscriber’s
VM
> box.
>
>
>
> Just make sure you are running the latest ES out there, you don’t want to
> hit bug  CSCsm46139.
>
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fet
chBugDetails&bugId=CSCsm46139
>
>
>
> Thanks,
>
>
>
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
> Sent: Tuesday, June 02, 2009 3:04 PM
> To: Go0se
> Cc: cisco-voip
> Subject: Re: [cisco-voip] Can Unity Voicemail 5x transfer direct to
> voicemail without ringing phone...
>
>
>
> I don't recall there ever being a solution to this without extra work. The
> only thing I can think of is creating a call handler for each voicemail
box
> with a blank greeting of about 5 seconds which transfers to the voicemail
> box for each user after the greeting.
>
> It's not scalable (2x the work) but if it's absolutely necessary, it's a
> workaround.
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
> ----- Original Message -----
> From: "Go0se" <me at go0se.com>
> To: "cisco-voip" <cisco-voip at puck.nether.net>
> Sent: Tuesday, June 2, 2009 3:53:06 PM GMT -05:00 US/Canada Eastern
> Subject: [cisco-voip] Can Unity Voicemail 5x transfer direct to voicemail
> without ringing phone...
>
>
> I’ve been meaning to address this for a few days
 and I apologize, I’m
> digging up an excerpt from an old post (below) that I pulled off the
> Internets (I already deleted the email)
>
>
>
> I’ve implemented the method below for quite some time but does anyone have
a
> way around the following example?:
>
>
>
> You are on a call that you wish to forward directly to voicemail so you
hit
> TRANSFER, then dial “*” plus the extension, but before you can hit
transfer
> a 2nd time, you already hear “Hi, this is Joe” (or whatever the user’s
> greeting is) – and the person you are transferring misses the first part
of
> the greeting?
>
>
>
> -Go0se
>
> http:/atc.go0se.com
>
>
>
> -------------------------------------
>
>
>
> This enables a end user or operator with a 7941 phone to do a Transfer
*XXXX
> Transfer and send caller direct to Voicemail.
>
>
>
>
>
>
>
> Transferring Calls Directly to Voice Mail with Cisco CallManager
>
>
>
>
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186
a00800dea82.shtml
>
>
>
>
>
> _______________________________________________ cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> CONFIDENTIALITY NOTICE: This electronic mail transmission (including any
> accompanying attachments) is intended solely for its authorized
> recipient(s), and may contain confidential and/or legally privileged
> information. If you are not an intended recipient, or responsible for
> delivering some or all of this transmission to an intended recipient, be
> aware that any review, copying, printing, distribution, use or disclosure
of
> the contents of this message is strictly prohibited. If you have received
> this electronic mail message in error, please delete it from your system
> without copying it, and contact sender immediately by Reply e-mail, or by
> calling 913-307-2300, so that our address records can be corrected.
>
> Although this e-mail and any attachments are believed to be free of any
> virus or other defect that might negatively affect any computer system
into
> which it is received and opened, it is the responsibility of the recipient
> to ensure that it is virus free and no responsibility is accepted by the
> sender for any loss or damage arising in any way in the event that such a
> virus or defect exists.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip