[cisco-voip] PIMG configs

[Countryman, Edward]

Examining call logs shows that when the VM pilot is dialed by user directly the "redirected number" field is not filled in.

My question however is, should I expect it work by tweaking the PIMG or is this a limitation on the TDM side??

-----Original Message-----
From: Pat Hayes [mailto:pat-cv at wcyv.com] 
Sent: Tuesday, June 02, 2009 5:27 PM
To: Lelio Fulgenzi
Cc: Countryman, Edward; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] PIMG configs

Sounds more like Unity isn't getting the call info from the PIMG. Get
a packet capture or look at the SIP traces (either from Unity or the
PIMG), is there a calling party number or is it anonymous? Most likely
culprit is a problem with the parsing rules on the PIMG, double check
that you loaded the right config file during install.

On Tue, Jun 2, 2009 at 5:38 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> I just completed a PIMG integration with Unity Connection 7 and it went
> fairly well. We get the appropriate sign-in process, i.e. enter your PIN,
> rather than *.
>
> The only thing I can think of is partitions included in the search space of
> the default routing rule.
>
> If you're using Unity (without partitions), not sure.
>
> I'd open a case with the TAC. They're usually pretty good.
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
> ----- Original Message -----
> From: "Edward Countryman" <Edward.Countryman at provena.org>
> To: cisco-voip at puck.nether.net
> Sent: Tuesday, June 2, 2009 5:27:54 PM GMT -05:00 US/Canada Eastern
> Subject: [cisco-voip] PIMG configs
>
> I've recently deployed PIMGs in my environment to enable users from our
> Nortel and Avaya legacy systems to become unity users.
>
>
>
> Although working ok, (lamps and greetings) pbx users are not recognized when
> they call into to check their messages.  When unity says "Hello" they are
> required to press * then their 6 digit mail box id.
>
>
>
> While not the end of the world; I was curious to see if this could be
> corrected.  Thoughts?
>
> _______________________________________________ cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>