[cisco-voip] Cisco ccm4.2 voip dial-peer

[John Botha]

Hi all 
 
I am trying to add a zero to a incomming call number my piolot number is 0400 
When i do a dedug isdn q931  i get the folling info 
 
Jun  5 07:33:06.800: ISDN BR0/2/0 Q931: RX <- SETUP pd = 8  callref = 0x40 
        Sending Complete 
        Bearer Capability i = 0x8090A3 
                Standard = CCITT 
                Transfer Capability = Speech  
                Transfer Mode = Circuit 
                Transfer Rate = 64 kbit/s 
        Channel ID i = 0x89 
                Exclusive, B1 
        Calling Party Number i = 0x00A3, N/A 
                Plan:Unknown, Type:Unknown 
        Called Party Number i = 0x81, '400' 
                Plan:ISDN, Type:Unknown 
        High Layer Compat i = 0x9181
 
 
The called party number is '400' and not 0400 
I have tried a lot of differnet configs but none seems to be helping me 
The Pilot does ring but doesnt go to the attendant 
I also included a copy of my config if anyone can help please point me in the correct direction 
 
All exteision numbers start with 0401 to 0490 and the pilot is 0400 
All internal call to the other branches is working and from internal you can dail in pilot and get to the attendent just fine 
 
I have a Cisco IOS Software, 2800 Software (C2800NM-SPSERVICESK9-M), Version 12.4(9)T7, RELEASE SOFTWARE (fc3)
 
and the config is as follows 


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090605/caf5a817/attachment.html>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Gateway.txt
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090605/caf5a817/attachment.txt>