[cisco-voip] GRE tunnel with QoS

[Eric Pedersen]

Thanks for the links Wes; I was unable to find information on what the default behaviour is.  I like it when configuration tasks are "None".

I have not tested it yet - I will be doing that next week.

From: Wes Sisk [mailto:wsisk at cisco.com]
Sent: June 4, 2009 21:09
To: Eric Pedersen
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] GRE tunnel with QoS

I've not tested it but:


http://www.cisco.com/en/US/docs/ios/11_3/feature/guide/greqos.html
Configuration Tasks
 None; this feature occurs by default.

http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a008017405e.shtml

Do you have indication that it is not working?

/Wes

On Thursday, June 04, 2009 8:54:37 PM, Eric Pedersen <eric.pedersen at sait.ca><mailto:eric.pedersen at sait.ca> wrote:

I want to set up a GRE tunnel to a remote site over our provider's MPLS VPN service.  They classify our voice traffic based on dscp. Does someone have an example of how to set this up so that when packets are tunneled, their DSCP values are copied to the GRE packet headers?

Thanks,
Eric






________________________________






_______________________________________________

cisco-voip mailing list

cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>

https://puck.nether.net/mailman/listinfo/cisco-voip



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090605/17d2cd30/attachment.html>