[cisco-voip] Cisco ccm4.2 voip dial-peer

[Jonathan Charles]

num-exp 400 0400


Jonathan

On Fri, Jun 5, 2009 at 2:45 AM, John Botha<botha911 at yahoo.com> wrote:
> Hi all
>
> I am trying to add a zero to a incomming call number my piolot number is
> 0400
> When i do a dedug isdn q931  i get the folling info
>
> Jun  5 07:33:06.800: ISDN BR0/2/0 Q931: RX <- SETUP pd = 8  callref = 0x40
>         Sending Complete
>         Bearer Capability i = 0x8090A3
>                 Standard = CCITT
>                 Transfer Capability = Speech
>                 Transfer Mode = Circuit
>                 Transfer Rate = 64 kbit/s
>         Channel ID i = 0x89
>                 Exclusive, B1
>         Calling Party Number i = 0x00A3, N/A
>                 Plan:Unknown, Type:Unknown
>         Called Party Number i = 0x81, '400'
>                 Plan:ISDN, Type:Unknown
>         High Layer Compat i = 0x9181
>
>
> The called party number is '400' and not 0400
> I have tried a lot of differnet configs but none seems to be helping me
> The Pilot does ring but doesnt go to the attendant
> I also included a copy of my config if anyone can help please point me in
> the correct direction
>
> All exteision numbers start with 0401 to 0490 and the pilot is 0400
> All internal call to the other branches is working and from internal you can
> dail in pilot and get to the attendent just fine
>
> I have a Cisco IOS Software, 2800 Software (C2800NM-SPSERVICESK9-M), Version
> 12.4(9)T7, RELEASE SOFTWARE (fc3)
>
> and the config is as follows
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>