[cisco-voip] "Normal Through" patch panel?

[Fuermann, Jason]

Not positive, but I think this is what you were looking for
http://www.panduit.com/Products/ProductOverviews/ProductSearch/index.htm?Ns=P_ItemSortOrder&Ne=1&R=VP24382TV25Y&sid=121CE579DF40&lastNodeId=ss_prod_coppersolutions&N=5000001%201865%203001514


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Robert Kulagowski
Sent: Wednesday, June 10, 2009 6:52 PM
To: Philip Walenta
Cc: 'Cisco VOIP'
Subject: Re: [cisco-voip] "Normal Through" patch panel?

Philip Walenta wrote:
> Here's the one I remember off the top of my head:
> 
> http://www.panduit.com/Products/ProductOverviews/CabinetsRacksCables/index.h
> tm 

That just takes me to a generic page of lots of stuff that Panduit makes 
- was there something specific that I should look at?  I looked at some 
of the obvious ones, but nothing seemed like it was what I was looking for.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip