[cisco-voip] Restricting Outbound Caller Name

Matthew Linsemier mlinsemier at apassurance.com
Thu Jun 11 14:36:58 EDT 2009


All,

I have created a route pattern that is suppose to restrict Calling Name
Presentation when a phone in a specific partition dials out.  However, for
some reason it seems that Telco (AT&T) is still sending the Calling Name
associated with that account even though ³Calling Name Presentation² is set
to ³restricted².  Should AT&T not be respecting our UCM¹s settings for
sending this information?

We are running UCM 7.0(2) utilizing MGCP for gateway control.

Please advise,

Matt

CONFIDENTIALITY STATEMENT
This communication and any attachments are CONFIDENTIAL and may
be protected by one or more legal privileges. It is intended
solely for the use of the addressee identified above. If you
are not the intended recipient, any use, disclosure, copying
or distribution of this communication is UNAUTHORIZED. Neither
this information block, the typed name of the sender, nor
anything else in this message is intended to constitute an
electronic signature unless a specific statement to the
contrary is included in this message. If you have received this
communication in error, please immediately contact me and delete
this communication from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090611/a3a6d37f/attachment.html>


More information about the cisco-voip mailing list