[cisco-voip] isdn switch-type primary-ni2c and nfas

[Paul]

It's merely a generality. 'primary-ni' is supposed to cover all types of NI switches. Don't fret. 

The only concern you should have is that NFAS seems to require a few prerequisites.

http://www.cisco.com/en/US/docs/ios/voice/isdn/configuration/guide/vi_nfas_dch_bkup.html



----- Original Message ----
From: "Roush, David" <droush at mckennalong.com>
To: cisco-voip at puck.nether.net
Sent: Thursday, June 11, 2009 9:13:57 PM
Subject: [cisco-voip] isdn switch-type primary-ni2c and nfas

Trying to turn-up 2 new circuits today and found out that the carrier
needs us to use primary-ni2  for the switch type. When trying to apply
the global command isdn switch-type primary-ni2, it only allows isdn
switch-type primary-ni, not ni2 or ni2c. The only place I can configure
the isdn switch-type primary-ni2c is on the serial interface once I
bring up the controllers, but the command does not stick and it reverts
back to primary-ni. Is there a way to configure the switch-type to
primary-ni2? Once I can get the switch-type correct, I'm hoping the nfas
setup is not that difficult.

Thanks.
David


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip