[cisco-voip] E-911 setup ERL information

[Scott Voll]

I may be way off, but I doubt ATT does the PSALI DB's.
I'm guessing Intrado might do it for them.  But you are correct.  you need
to get a hold of the MSAG group to get your service setup with whomever is
the PSALI DB provider.

with Qwest / Intrado I'm using NANA 2.1 from what I can remember.

Scott

On Fri, Jun 12, 2009 at 7:10 AM, Voice Noob <voicenoob at gmail.com> wrote:

>  CUCM 7.x with Emergency Responder 7.x.  I have all of the translations
> and locations setup working correctly. My problem is with the local PSAP
> operator. The place I am setting up is a large campus but the local Telco
> did not offer PRI’s or CAMA trunks before this installation. This customer
> has enough clout locally to get the Telco to get the equipment so they can
> have PRI’s because they wanted to implement E-911 to the police even though
> there is no law requiring it yet.  Now when I try to export my location
> information the local PSAP administrator does not know what to do with it.
> He states that all of that is handled by AT&T at the MSAG. I don’t know what
> MSAG is but it sounds like that is where I need to go.  Does anyone know of
> a standard way to export the information that AT&T would accept. I think I
> have hit a brick wall locally.
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090612/9eb0ad64/attachment.html>