[cisco-voip] E-911 setup ERL information

Fri Jun 12 13:11:44 EDT 2009

NENA IDs can be applied for on the NENA Website

http://www.nena.org/nena-company-id

Joe

From: Voice Noob [mailto:voicenoob at gmail.com] 
Sent: Friday, June 12, 2009 12:08 PM
To: Joe Pollere (US); cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] E-911 setup ERL information

How would I get this information? Thanks for everyone's help.

Order Number

241 - 250

10

AN

R/SF

The service order number for the activity establishing this record. 

Extract Date

251 - 256

6

N

R +/or

SF

The date on which the record was created in month, day, year, format
(e.g. MMDDYY).

Company ID

261 - 265

5

AN

R

The Telephone Company Identification code.  This field is to be
populated using the NENA Company Code.

From: Joe Pollere (US) [mailto:Joe.Pollere at us.didata.com] 
Sent: Friday, June 12, 2009 9:43 AM
To: Voice Noob; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] E-911 setup ERL information

The MSAG (Master Street Address Guide) is a table of information in the
FR/DBMS that is built by a municipality with the telephone company.  It
contains a listing of all streets and housing number ranges within a
9-1-1-service area.  

The ALI data is usually exported from CER in NENA 2.0 or 2.1 format for
upload to the ALI database of the Provider. The format may vary slightly
depending on the vendor requirements. Attached is a description of the
fields required.

Suggest going to this site to search for E911 contacts depending on what
servicing area the customer is located:

https://clec.att.com/clec/hb/index.cfm

Joe

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voice Noob
Sent: Friday, June 12, 2009 10:11 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] E-911 setup ERL information

CUCM 7.x with Emergency Responder 7.x.  I have all of the translations
and locations setup working correctly. My problem is with the local PSAP
operator. The place I am setting up is a large campus but the local
Telco did not offer PRI's or CAMA trunks before this installation. This
customer has enough clout locally to get the Telco to get the equipment
so they can have PRI's because they wanted to implement E-911 to the
police even though there is no law requiring it yet.  Now when I try to
export my location information the local PSAP administrator does not
know what to do with it. He states that all of that is handled by AT&T
at the MSAG. I don't know what MSAG is but it sounds like that is where
I need to go.  Does anyone know of a standard way to export the
information that AT&T would accept. I think I have hit a brick wall
locally. 

________________________________

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you. 

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090612/78cdfb8d/attachment.html>