[cisco-voip] E-911 setup ERL information

[Paul]

http://camerafraud.files.wordpress.com/2009/04/blamecanada.jpg




________________________________
From: Scott Voll <svoll.voip at gmail.com>
To: Lelio Fulgenzi <lelio at uoguelph.ca>
Cc: cisco-voip at puck.nether.net
Sent: Friday, June 12, 2009 3:21:43 PM
Subject: Re: [cisco-voip] E-911 setup ERL information

ouch..... Qwest / Intrudo is like $250 install and $65 / month.

Scott


On Fri, Jun 12, 2009 at 9:40 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

In the interest of sharing, PSALI service from Canada is about $2000 for installation and $250/mo for the first 500 records.

It's definitely something you'll need to budget for.

YMMV




---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt


----- Original Message -----

From: "Jonathan Madziarczyk" <JMad at cityofevanston.org>
To: cisco-voip at puck.nether.net

Sent: Friday, June 12, 2009 12:31:45 PM GMT -05:00 US/Canada Eastern
Subject: Re: [cisco-voip] E-911 setup ERL information


MSAG (Master Street Address Guide) 
it’s just a database of street addresses that the PSAP uses to identify
locations.  You are correct, the PSAP doesn’t really need to be a
part of your E911 until the time comes around to actually test and confirm that
what you think you are sending them is accurate.  Though it never hurts to
show them what you’re planning (especially with a large campus) and see
if they have any input that would help them get their emergency services to the
exact locations.
 
I know AT&T uses Intrado in Illinois to manage their
MSAG and ANI/ALI.
 
Lelio is correct, you need to go to your
Telco and find out how you can manage your ANI/ALI info.  They already
have your ANIs (numbers) they just need you to tied that to your ALI
(location).  There’s always a cost associated to this and they will
provide you with the correct syntax for your output to their database.
 
Depending on how big your campus is, it
may be easier to just manually change your ANI/ALI info instead of trying to
get CER to export it.
 
Let us know how it goes.
 

________________________________

From:cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voice Noob
Sent: Friday, June 12, 2009 11:05
AM
To: 'Lelio Fulgenzi'
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] E-911
setup ERL information
 
I don’t think I need this PSALI
you are talking about. I just need to send a different DID number outbound for
each ERL. 
 
From:Lelio Fulgenzi
[mailto:lelio at uoguelph.ca] 
Sent: Friday, June 12, 2009 10:01
AM
To: Voice Noob
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] E-911
setup ERL information
 
As
far as I know, E911 information is given to the Telco, not the PSAP. The PSAP
rarely wants to hear from you. Even testing is getting to be a bit of an issue
in metropolitan areas.

You have to get a PSALI type service from your provider. This costs money and
allows you to update the records for the DIDs you have purchased. In Canada anyways.

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt


----- Original Message -----
From: "Voice Noob" <voicenoob at gmail.com>
To: cisco-voip at puck.nether.net
Sent: Friday, June 12, 2009 10:10:49 AM GMT -05:00 US/Canada Eastern
Subject: [cisco-voip] E-911 setup ERL information


CUCM 7.x with Emergency Responder
7.x.  I have all of the translations and locations setup working
correctly. My problem is with the local PSAP operator. The place I am setting
up is a large campus but the local Telco did not offer PRI’s or CAMA
trunks before this installation. This customer has enough clout locally to get
the Telco to get the equipment so they can have PRI’s because they wanted
to implement E-911 to the police even though there is no law requiring it
yet.  Now when I try to export my location information the local PSAP
administrator does not know what to do with it. He states that all of that is
handled by AT&T at the MSAG. I don’t know what MSAG is but it sounds
like that is where I need to go.  Does anyone know of a standard way to
export the information that AT&T would accept. I think I have hit a brick
wall locally. 
 
 

_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 
_______________________________________________
cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip