[cisco-voip] Invalid information element contents

[Shine Joseph]

Hi,

I am configuring a H323 GW with CUCM6.x to be dialed out via ISDN BRI. I can sucessfully receive the calls, but when calls are being dialled out, the calls are not being sent out. The ISDN Q931 debug shows as follows. Can anyone sggest what may be the issue?
-----------------------------------
ISDN BR0/0/0 Q931: Applying typeplan for sw-type 0x1 is 0x0 0x0, Calling num 93111501
ISDN BR0/0/0 Q931: Sending SETUP  callref = 0x001F callID = 0x8027 switch = basic-net3 interface = User 
ISDN BR0/0/0 Q931: TX -> SETUP pd = 8  callref = 0x1F 
        Bearer Capability i = 0x8090A2 
                Standard = CCITT 
                Transfer Capability = Speech  
                Transfer Mode = Circuit 
                Transfer Rate = 64 kbit/s 
        Channel ID i = 0x81 
                Preferred, B1 
        Calling Party Number i = 0x0081, '93111501' 
                Plan:Unknown, Type:Unknown 
        Called Party Number i = 0x80, '0414602914' 
                Plan:Unknown, Type:Unknown 
        Sending Complete
     ISDN BR0/0/0 Q931: RX <- RELEASE_COMP pd = 8  callref = 0x9F 
        Cause i = 0x82E404 - Invalid information element contents
----------------------------------------
Thanks in advance.

Shine
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090613/e2697ba9/attachment.html>