[cisco-voip] About Grandstream HT502 ATA device and usability with CUCM 6.0

[Paul]

Did you read the HT502 manual already?
http://tinyurl.com/lyvgb2

Apparently it only supports SIP for signaling.

You can't use CCM TFTP for its firmware so you'll have to upgrade it manually if necessary.

You'll then have to turn it into a SIP UA that can talk to the SIP components under CCM6.


________________________________
From: cem caglayan <cem.caglayan at gmail.com>
To: cisco-voip at puck.nether.net
Sent: Tuesday, June 16, 2009 1:33:50 AM
Subject: [cisco-voip] About Grandstream HT502 ATA device and usability with CUCM 6.0

Hi all,

Here is the deal, i have a grandstream ht502 ATA device
in my hand, is there any way to implement this device to CUCM 6.0 to
make analog phones getting used???

I've googled and could not find any related document.

Help will be appreciated.

Thanks in advance...