[cisco-voip] Help with first time VOIP setup.

[Paul]

search for fxs sccp controlled or something like that...


----- Original Message ----
From: Anthony R. Mattke <a.mattke at gmail.com>
To: Paul <asobihoudai at yahoo.com>
Cc: cisco-voip at puck.nether.net
Sent: Tuesday, June 16, 2009 10:19:29 PM
Subject: Re: [cisco-voip] Help with first time VOIP setup.

I had no clue you could do that. Sorry ! I'll look and see if I find an 
example of that done.

Thanks !

-Tony


Paul wrote:
> Then make it an ephone by registering your FXS port using SCCP.
> 
> It's easier that way...
> 
> 
> ----- Original Message ----
> From: Anthony R. Mattke <a.mattke at gmail.com>
> To: Paul <asobihoudai at yahoo.com>
> Cc: cisco-voip at puck.nether.net
> Sent: Tuesday, June 16, 2009 10:12:37 PM
> Subject: Re: [cisco-voip] Help with first time VOIP setup.
> 
> One of them isn't an ephone. Its a FXS port using a dial-peer such as..
> 
> !
> dial-peer voice 55 pots
> destination-pattern 55
> port 1/1
> !
> 
> And then a ephone-dn that I want to use the same extension, or make ring at the same time so either can answer the call..
> 
> Paul wrote:
>> Use overlay.
>>
>> Assign ephone one and two the same extension originating from two separate ephone-DNs and then use overlay to have them both ring.
>>
>>
>> ----- Original Message ----
>> From: Anthony R. Mattke <a.mattke at gmail.com>
>> To: cisco-voip at puck.nether.net
>> Sent: Tuesday, June 16, 2009 6:13:32 PM
>> Subject: Re: [cisco-voip] Help with first time VOIP setup.
>>
>> Ok, so today, I've been attempting to have two phones ring for the same extension.
>>
>> I see this is fairly simple if they're both ephones, but what about 1 ephone and 1 pots ? I can't seem to make this work, and I can't find any documentation regarding setting this up.
>>
>> -Tony
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>>
>>      
> 
> 
>      
>