[cisco-voip] Phones Ring but no voice? CME- to other Router

[Robin Clayton]

Hi All.
 
>From my brief reading it would seem that an AIM is only required if using something like a T1/E1 to handle multiple calls. Does this sound correct?
 
Cheers
 
Rob
 
 
>Cheers,
>Tim

On Mon, Jun 15, 2009 at 9:36 PM, Robin Clayton <Robin.Clayton at rrca.org.uk> wrote:


Test Lab Setup is.
1760 with CME4 and 2 7940's
Conected via ethernet to
2651 with 2 POTS on FXO's
Call from 7940 to 7940 work fine
Call from POTS to POTS work fine
Previously with FXO in the 1760, 7940 to POTS worked fine.
Now when I try to place a call between the CME router and the other router or vice versa, the phones ring as expected but then there is no voice between the phones. 
Has anyone got any ideas as I am realy scratching my head on this now and getting frustrated.
Thanks
Robin
===============================
Robin Clayton
Network Manager 
Tel: 01228822075 


Richard Rose Central Academy 
Edgehill Road 
Carlisle 
Cumbria 
CA1 3SL 

Tel: 01228 822060 
Fax: 01228 822061 

http://www.richardroseacademies.org/ 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090617/618fef2f/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 7338 bytes
Desc: CompuServe GIF graphic
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090617/618fef2f/attachment.gif>