[cisco-voip] meet-me bridging across different clusters

[Matthew Saskin]

No to both.  Meetme conferences must be started from cisco phones
using the meetme softkey, and if users from cluster 2 want to join a
meetme bridge on cluster 1 you'll either need to route them across the
PSTN or an ICT to the cluster 1 bridge number.

-matt

On 6/18/09, venkata sashank <reachsashank at gmail.com> wrote:
> Hi all,
> I have the following requirement regarding Meet-me Conference:
> The Meet-Me Conferences should be automatically bridged across the different
> CUCM Clusters as soon as a user dials the local meet-me number e.g. At any
> point of time, a user in a Cluster-1( say 1001 in site A) should be able to
> dial the meet-me number 1111 and another user in Cluster-2 ( say 2001 in
> Site B) should be able to dial the meet-me number 2222 and become a part of
> the multi site conference. There shouldn't be any need of dialling the other
> site's Meet-me number.
> I am using CUCM 6.1 for all the sites.
>
> Moreover, is it possible to start a meet me conference without having to
> push the meet me softkey i.e a particular meet conference should be always
> on so that any user can directly dial into it.
>
> Thanks....
> venakta sasanka.pathi
> sasanka.pathi at locuz.com
>