[cisco-voip] CUCM 6.0 Calling Search Space issue...

[Michael Back]

You could try extension mobility.  Make sure the phone CSS is most
restrictive, and put the appropriate CSS on the line like you are
currently doing.  You can set a timer for Extension Mobility to log out
after a specified period.

MB

>>> cem caglayan <cem.caglayan at gmail.com> 6/18/2009 5:55 AM >>>
First of all thanks for the tip Dan,

The main problem is, we do not have any partitions which all the
phones
assigned to..

Our dial rules are described in "Calling Search Spaces" which consist 4
or
more partitions. Besides, all the phones' Calling Search Spaces are
setted
into the directory number configuration. I've found how to change all
the
phones' Calling Search Spaces to the desired value under the "Bulk
Administration>Phones>Add/Update Lines>Update Lines" section.

But the main problem is, we have 3 PRI lines and 12 GSM lines connected
to
CM via PRI by 2N Stargate. And as i described, all the phones' Calling
Search Spaces are not the same at all. For example my phone can call
GSM and
landlines, but my manager's can call international including my dial
rule.
My Calling Search Space is "Landlines and GSM" but my manager's
"International Calls (which means everywhere can be called)".

So in brief, the problem is when i set all these phones' calling
search
space to NONE on a scheduled job. How can i restore them to their
original
values??

By the way i have found to backup all the phone settings under "Bulk
Administration>Phones>Export Phones>All Details". But it stores the
data in
a TXT file. So i can not restore from that backup.

Is there any way to fullfill according to my CUCM 6.0 profile???

On Thu, Jun 18, 2009 at 9:46 AM, Daniel <dan.voip at danofive.id.au>
wrote:

> Hi,
>
> Have you looked into time periods and schedules?
>
> Apply a time schedule to a partition to allow access only during a
certain
> time period.
>
> cheers,
>
> Dan
>
> On Thu, Jun 18, 2009 at 4:16 PM, cem caglayan
<cem.caglayan at gmail.com>wrote:
>
>> Hi all,
>>
>> I want to set some (about 300) users' calling search space to be set
to
>> "none" after shift and bring them to their original values in the
>> morning,because of company policy. Is there any way to do this
automatically
>> or can this action be scheduled? Because, as you know, it is very
difficult
>> to set all these users' settings to desired one and bring them back
to old
>> values. I looked at some features including Job scheduler and
Enterprise
>> settings but no use.
>>
>>
>> Thanks in advance.
>>
>> Cem
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net 
>> https://puck.nether.net/mailman/listinfo/cisco-voip 
>>
>>
>