[cisco-voip] CUCM 6.0 Calling Search Space issue...

Lelio Fulgenzi lelio at uoguelph.ca
Thu Jun 18 08:51:11 EDT 2009


I think you'll find yourself in a mess of trouble trying to do it by changing the calling search space. The timed based partitions is probably your best bet. 

Remember, the partition the phone is in has nothing to do with the partitions it can reach. 

Please explain your set up a bit more for us, and we'll try to help with suggestions using time based partitions. I haven't used them much, but it's fairly easy from what I recall. 

The one thing I always forget is when the <none> partition is searched. I can't remember if it is searched after all the other partitions only if no other match is found, or if it is searched in order and best match rules apply. 

For the long term sanity of your setup, I'd strongly suggest moving your DNs to a partition. It's easier to manage things like that. 

You'll also have to let us know what you are trying to block, access to phones or access to off-net? And what dial plan strategy are you using? allow with device and block with DN, or just allow with device? 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Michael Back" <Michael.Back at nisd.net> 
To: "Daniel" <dan.voip at danofive.id.au>, "cem caglayan" <cem.caglayan at gmail.com> 
Cc: cisco-voip at puck.nether.net 
Sent: Thursday, June 18, 2009 8:27:11 AM GMT -05:00 US/Canada Eastern 
Subject: Re: [cisco-voip] CUCM 6.0 Calling Search Space issue... 

You could try extension mobility. Make sure the phone CSS is most 
restrictive, and put the appropriate CSS on the line like you are 
currently doing. You can set a timer for Extension Mobility to log out 
after a specified period. 

MB 

>>> cem caglayan <cem.caglayan at gmail.com> 6/18/2009 5:55 AM >>> 
First of all thanks for the tip Dan, 

The main problem is, we do not have any partitions which all the 
phones 
assigned to.. 

Our dial rules are described in "Calling Search Spaces" which consist 4 
or 
more partitions. Besides, all the phones' Calling Search Spaces are 
setted 
into the directory number configuration. I've found how to change all 
the 
phones' Calling Search Spaces to the desired value under the "Bulk 
Administration>Phones>Add/Update Lines>Update Lines" section. 

But the main problem is, we have 3 PRI lines and 12 GSM lines connected 
to 
CM via PRI by 2N Stargate. And as i described, all the phones' Calling 
Search Spaces are not the same at all. For example my phone can call 
GSM and 
landlines, but my manager's can call international including my dial 
rule. 
My Calling Search Space is "Landlines and GSM" but my manager's 
"International Calls (which means everywhere can be called)". 

So in brief, the problem is when i set all these phones' calling 
search 
space to NONE on a scheduled job. How can i restore them to their 
original 
values?? 

By the way i have found to backup all the phone settings under "Bulk 
Administration>Phones>Export Phones>All Details". But it stores the 
data in 
a TXT file. So i can not restore from that backup. 

Is there any way to fullfill according to my CUCM 6.0 profile??? 

On Thu, Jun 18, 2009 at 9:46 AM, Daniel <dan.voip at danofive.id.au> 
wrote: 

> Hi, 
> 
> Have you looked into time periods and schedules? 
> 
> Apply a time schedule to a partition to allow access only during a 
certain 
> time period. 
> 
> cheers, 
> 
> Dan 
> 
> On Thu, Jun 18, 2009 at 4:16 PM, cem caglayan 
<cem.caglayan at gmail.com>wrote: 
> 
>> Hi all, 
>> 
>> I want to set some (about 300) users' calling search space to be set 
to 
>> "none" after shift and bring them to their original values in the 
>> morning,because of company policy. Is there any way to do this 
automatically 
>> or can this action be scheduled? Because, as you know, it is very 
difficult 
>> to set all these users' settings to desired one and bring them back 
to old 
>> values. I looked at some features including Job scheduler and 
Enterprise 
>> settings but no use. 
>> 
>> 
>> Thanks in advance. 
>> 
>> Cem 
>> 
>> _______________________________________________ 
>> cisco-voip mailing list 
>> cisco-voip at puck.nether.net 
>> https://puck.nether.net/mailman/listinfo/cisco-voip 
>> 
>> 
> 
_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090618/964cf5bf/attachment.html>


More information about the cisco-voip mailing list