[cisco-voip] CUCM 6.0 Calling Search Space issue...

[Chris Ward (chrward)]

I saw a response early in this thread that was not directly replied to.
Why won't Time of Day routing fulfill your requirements?

-Chris


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
(rratliff)
Sent: Thursday, June 18, 2009 11:40 AM
To: cem caglayan
Cc: cisco-voip Voip
Subject: Re: [cisco-voip] CUCM 6.0 Calling Search Space issue...

If you truly want to change all phones' CSS to None and back to their  
original value on a scheduled basis you would have to script this via  
AXL.  You would need to first discover all the lines and note their  
current CSS.  Then update all of those lines to use CSS None.  When  
it comes time to revert you change the CSS back to the value you  
discovered (and stored) originally.

As Lelio said if you can provide more details about the policy you  
are trying to implement there is a very good chance it can be done in  
a way that doesn't require changing all of your phone configurations  
each night.

-Ryan

On Jun 18, 2009, at 8:51 AM, Lelio Fulgenzi wrote:

I think you'll find yourself in a mess of trouble trying to do it by  
changing the calling search space. The timed based partitions is  
probably your best bet.

Remember, the partition the phone is in has nothing to do with the  
partitions it can reach.

Please explain your set up a bit more for us, and we'll try to help  
with suggestions using time based partitions. I haven't used them  
much, but it's fairly easy from what I recall.

The one thing I always forget is when the <none> partition is  
searched. I can't remember if it is searched after all the other  
partitions only if no other match is found, or if it is searched in  
order and best match rules apply.

For the long term sanity of your setup, I'd strongly suggest moving  
your DNs to a partition. It's easier to manage things like that.

You'll also have to let us know what you are trying to block, access  
to phones or access to off-net? And what dial plan strategy are you  
using? allow with device and block with DN, or just allow with device?


---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt


----- Original Message -----
From: "Michael Back" <Michael.Back at nisd.net>
To: "Daniel" <dan.voip at danofive.id.au>, "cem caglayan"  
<cem.caglayan at gmail.com>
Cc: cisco-voip at puck.nether.net
Sent: Thursday, June 18, 2009 8:27:11 AM GMT -05:00 US/Canada Eastern
Subject: Re: [cisco-voip] CUCM 6.0 Calling Search Space issue...

You could try extension mobility.  Make sure the phone CSS is most
restrictive, and put the appropriate CSS on the line like you are
currently doing.  You can set a timer for Extension Mobility to log out
after a specified period.

MB

 >>> cem caglayan <cem.caglayan at gmail.com> 6/18/2009 5:55 AM >>>
First of all thanks for the tip Dan,

The main problem is, we do not have any partitions which all the
phones
assigned to..

Our dial rules are described in "Calling Search Spaces" which consist 4
or
more partitions. Besides, all the phones' Calling Search Spaces are
setted
into the directory number configuration. I've found how to change all
the
phones' Calling Search Spaces to the desired value under the "Bulk
Administration>Phones>Add/Update Lines>Update Lines" section.

But the main problem is, we have 3 PRI lines and 12 GSM lines connected
to
CM via PRI by 2N Stargate. And as i described, all the phones' Calling
Search Spaces are not the same at all. For example my phone can call
GSM and
landlines, but my manager's can call international including my dial
rule.
My Calling Search Space is "Landlines and GSM" but my manager's
"International Calls (which means everywhere can be called)".

So in brief, the problem is when i set all these phones' calling
search
space to NONE on a scheduled job. How can i restore them to their
original
values??

By the way i have found to backup all the phone settings under "Bulk
Administration>Phones>Export Phones>All Details". But it stores the
data in
a TXT file. So i can not restore from that backup.

Is there any way to fullfill according to my CUCM 6.0 profile???

On Thu, Jun 18, 2009 at 9:46 AM, Daniel <dan.voip at danofive.id.au>
wrote:

 > Hi,
 >
 > Have you looked into time periods and schedules?
 >
 > Apply a time schedule to a partition to allow access only during a
certain
 > time period.
 >
 > cheers,
 >
 > Dan
 >
 > On Thu, Jun 18, 2009 at 4:16 PM, cem caglayan
<cem.caglayan at gmail.com>wrote:
 >
 >> Hi all,
 >>
 >> I want to set some (about 300) users' calling search space to be set
to
 >> "none" after shift and bring them to their original values in the
 >> morning,because of company policy. Is there any way to do this
automatically
 >> or can this action be scheduled? Because, as you know, it is very
difficult
 >> to set all these users' settings to desired one and bring them back
to old
 >> values. I looked at some features including Job scheduler and
Enterprise
 >> settings but no use.
 >>
 >>
 >> Thanks in advance.
 >>
 >> Cem
 >>
 >> _______________________________________________
 >> cisco-voip mailing list
 >> cisco-voip at puck.nether.net
 >> https://puck.nether.net/mailman/listinfo/cisco-voip
 >>
 >>
 >
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip