[cisco-voip] Transcoder-Conference Config

[Binu John]

I was configuring Transcoding in voice gateway,In CUCM Administration shows
Registration rejected and when i do
show sccp command iam getting following error-

VG3#SH SCCp
SCCP Admin State: UP
Gateway IP Address: 10.200.118.23, Port Number: 2000
IP Precedence: 3
User Masked Codec list: None
Call Manager: 10.200.118.11, Port Number: 2000
                Priority: N/A, Version: 4.1, Identifier: 73
Call Manager: 10.200.118.12, Port Number: 2000
                Priority: N/A, Version: 4.1, Identifier: 74

Transcoding Oper State: ACTIVE_IN_PROGRESS - Cause Code: CCM_REGISTER_FAILED
Active Call Manager: 10.200.118.12, Port Number: 2000
TCP Link Status: NOT_CONNECTED, Profile Identifier: 1
Reported Max Streams: 12, Reported Max OOS Streams: 0

My Config as follows-

Sccp local FastEthernet0/0
sccp ccm 10.200.118.12 identifier 74
sccp ccm 10.200.118.11 identifier 73
sccp ip precedence 3
!
sccp ccm group 1
 associate ccm 74 priority 1
 associate ccm 73 priority 2
 associate profile 1 register XCODE-NDCCFB
 associate profile 20 register HOHWCFB
 registration retries 15
 keepalive retries 7
 keepalive timeout 50
 connect retries 5
 connect interval 1200
 switchback method graceful
 switchback interval 120
!
dspfarm profile 1 transcode
 codec g711ulaw
 codec g711alaw
 codec g729ar8
 codec g729abr8
 codec g729r8
 maximum sessions 6
 associate application SCCP
!

dspfarm profile 20 conference
 description **HW ConferenceBridge
 codec g711ulaw
 codec g711alaw
 codec g729ar8
 codec g729abr8
 codec g729r8
 codec g729br8
 maximum sessions 2
 associate application SCCP

Pls advice if there is any wrong in my config.
Rgds
John
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090618/7238ff3a/attachment.html>