[cisco-voip] SIP Trunk to Paetec ITSP

[Paul]

If they have a ISR (2800, 3800...) they can use CCME with SIP trunking. . . 

Paul




________________________________
From: "tednugent73 at gmail.com" <tednugent73 at gmail.com>
To: Cisco VoIPoE List <cisco-voip at puck.nether.net>
Sent: Friday, June 19, 2009 12:38:17 PM
Subject: [cisco-voip] SIP Trunk to Paetec ITSP

Has anyone had any experience (good bad or otherwise) with SIP Trunking to Paetec/USLEC? I have a new client that has ordered SIP Trunks at 3 locations through Paetec. They are looking for us to help them implement the solution in 3 weeks and I’m not seeing any CUBEs or IADs on the order and of course Paetec has assured them that they are not required…? I’m coming into this late as the “design” (or lack thereof) is already in place and I’d like to know if there is anything that I should be ready for. I don’t have a ton of experience with SIP trunks, at least not with Paetec but I know that faxing is always an issue and you’d need CUBE at a minimum just to get that working, anything else or any other comments on Paetec or SIP as a whole? TIA for any insight.


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090619/c0e35272/attachment.html>