[cisco-voip] Apply Changes

Truelove_John JTruelove at aetinc.com
Mon Jun 22 09:44:10 EDT 2009


I have had similar problems with 6.1 and phones not taking new changes.

Rebooting the servers fixed the problem, the phones then took the new
changes.

I think I just had to reboot the sub.

 

John

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Dennis Heim
Sent: Monday, June 22, 2009 9:25 AM
To: Mihajlo Mitev; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Apply Changes

 

Was this cluster 5.x and then upgraded to 6.x?

________________________________

From: cisco-voip-bounces at puck.nether.net
[cisco-voip-bounces at puck.nether.net] On Behalf Of Mihajlo Mitev
[mihajlo.mitev at makstil.com.mk]
Sent: Monday, June 22, 2009 8:27 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Apply Changes

Hi

I have problem with applying changes made in CUCM 6.1 to cisco IP
phones. Example: When I made new softkey template and I apply to
specific devices, I press Reset button and nothing happened (devices
wont reset). I reset phone manually (unplug and plug the cable) and the
device is registered  with CUCM but he still want to apply new softkey
template. I read that this could be problem with DB Replication (I don't
receive error in RTMT about this). Any idea what can be the problem. We
have two CUCM (primary and secondary) I made changes to the primary.

 

Thanks,

 

Mihajlo Mitev

IT Department

Makstil AD Skopje

 


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090622/0e535bad/attachment.html>


More information about the cisco-voip mailing list