[cisco-voip] Kernel Panic after upgrade to 7.1(2a)

[Teixeira, Mike]

I did and they matched what was in the readme.

Mike

From: Fuermann, Jason [mailto:JBF005 at shsu.edu]
Sent: Thursday, June 25, 2009 2:24 PM
To: Teixeira, Mike; cisco-voip at puck.nether.net
Subject: RE: Kernel Panic after upgrade to 7.1(2a)

Just out of morbid curiosity, did you check the MD5 sum after download and burning?

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Teixeira, Mike
Sent: Thursday, June 25, 2009 3:47 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Kernel Panic after upgrade to 7.1(2a)

Hello

I had problems upgrading from CUCM 7.0.2 to 7.1(2a) using DVD. After multiple DVDs and multiple attempts the install completed. However, I couldn't get an option to reboot to upgraded partition after installation completed. So, I ran the upgrade again this time I requested server to reboot to upgraded partition after reboot. The install completed successfully, system rebooted and it kernel paniced.

Errors:
Mount: error 2 mounting ext3
Mount: error 2 mounting none
Switching to new root
Switchroot: mount failed: 22
Umount /initrd/dev failed:2
Kernel panic - not syncing: Attempted to kill init!

I will probably open a TAC Case. Fortunately this system is my new call manager and isn't in production yet. Grub won't allow me to select Partition A on boot up. Will I have to re-install to get out of this predicament?

Thanks,
Mike
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090625/11890f3c/attachment.html>