[cisco-voip] Kernel Panic after upgrade to 7.1(2a)

[Wes Sisk]

download and boot the recovery disk. use that to chkdsk and to switch 
back to the inactive partition.  maybe.



On Thursday, June 25, 2009 4:47:19 PM, Teixeira, Mike 
<mwteixeira at bendbroadband.net> wrote:
>
> Hello
>
>  
>
> I had problems upgrading from CUCM 7.0.2 to 7.1(2a) using DVD. After 
> multiple DVDs and multiple attempts the install completed. However, I 
> couldn't get an option to reboot to upgraded partition after 
> installation completed. So, I ran the upgrade again this time I 
> requested server to reboot to upgraded partition after reboot. The 
> install completed successfully, system rebooted and it kernel paniced.
>
>  
>
> Errors:
>
> Mount: error 2 mounting ext3
>
> Mount: error 2 mounting none
>
> Switching to new root
>
> Switchroot: mount failed: 22
>
> Umount /initrd/dev failed:2
>
> Kernel panic -- not syncing: Attempted to kill init!
>
>  
>
> I will probably open a TAC Case. Fortunately this system is my new 
> call manager and isn't in production yet. Grub won't allow me to 
> select Partition A on boot up. Will I have to re-install to get out of 
> this predicament?
>
>  
>
> Thanks,
>
> Mike
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090625/c3190e61/attachment.html>