[cisco-voip] Kernel Panic after upgrade to 7.1(2a)

[Teixeira, Mike]

Thanks, I am able to get back to my 7.0.2 partition now.

Mike

From: Wes Sisk [mailto:wsisk at cisco.com]
Sent: Thursday, June 25, 2009 2:33 PM
To: Teixeira, Mike
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Kernel Panic after upgrade to 7.1(2a)

download and boot the recovery disk. use that to chkdsk and to switch back to the inactive partition.  maybe.



On Thursday, June 25, 2009 4:47:19 PM, Teixeira, Mike <mwteixeira at bendbroadband.net><mailto:mwteixeira at bendbroadband.net> wrote:

Hello

I had problems upgrading from CUCM 7.0.2 to 7.1(2a) using DVD. After multiple DVDs and multiple attempts the install completed. However, I couldn't get an option to reboot to upgraded partition after installation completed. So, I ran the upgrade again this time I requested server to reboot to upgraded partition after reboot. The install completed successfully, system rebooted and it kernel paniced.

Errors:
Mount: error 2 mounting ext3
Mount: error 2 mounting none
Switching to new root
Switchroot: mount failed: 22
Umount /initrd/dev failed:2
Kernel panic - not syncing: Attempted to kill init!

I will probably open a TAC Case. Fortunately this system is my new call manager and isn't in production yet. Grub won't allow me to select Partition A on boot up. Will I have to re-install to get out of this predicament?

Thanks,
Mike






________________________________






_______________________________________________

cisco-voip mailing list

cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>

https://puck.nether.net/mailman/listinfo/cisco-voip



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090625/2b1a1260/attachment.html>