[cisco-voip] CM, Gateway, and PRI

[Matthew Saskin]

The latter only occurs if you have ccm-manager config-server defined however.

-matt


On 5/4/09, Erick Bergquist <erickbee at gmail.com> wrote:
> If it is a MGCP gateway endpoint, then the settings in the Call
> Manager config will be put on the router voice-port settings via MGCP.
>  If your MGCP, and you set them on the router voice-port then when the
> MGCP connection resets and the MGCP config is pushed down to the
> router the voice-port settings will get over wrote by what comes from
> the call manager for those settings.
>
>
>
> On Mon, May 4, 2009 at 10:09 AM, Jeff Ruttman <ruttmanj at carewisc.org> wrote:
>> Greetings,
>>
>>
>>
>> I’ve noticed in CM that on the Gateway config, there are Input Gain,
>> Output
>> Attenuation, Echo Cancel, and Echo Coverage settings.  You can also set
>> these on the voice ports on routers.
>>
>>
>>
>> What is the difference?  Do you have to configure both?  Is there a reason
>> to use one rather than the other?
>>
>>
>>
>> Thanks
>>
>> jeff
>>
>>
>> CONFIDENTIALITY NOTICE: The information contained in this email including
>> attachments is intended for the specific delivery to and use by the
>> individual(s) to whom it is addressed, and includes information which
>> should
>> be considered as private and confidential. Any review, retransmission,
>> dissemination, or taking of any action in reliance upon this information
>> by
>> anyone other than the intended recipient is prohibited. If you have
>> received
>> this message in error, please reply to the sender immediately and delete
>> the
>> original message and any copy of it from your computer system. Thank you.
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>