[cisco-voip] Authorization code on Conference Phones

[Duy Nguyen]

Cisco.com and support, then choose configure.  Voila!

On Thu, May 7, 2009 at 10:18 PM, gin Murray <kinusca at gmail.com> wrote:

> Hi
>
> can you please tell me how to configure it...
>
>   On Wed, May 6, 2009 at 11:53 PM, Daniel <dan.voip at danofive.id.au> wrote:
>
>> Hi,
>>
>> Have a look at Client Matter Codes and Forced Authorisation Codes.
>>
>> regards,
>>
>> Dan
>>
>>   On Thu, May 7, 2009 at 4:43 PM, gin Murray <kinusca at gmail.com> wrote:
>>
>>>   Hi
>>>
>>> There is a requirement to use Authorization code for the conference
>>> phones.
>>>
>>> The complete requirement is : The phones in teh conference room will have
>>> no access to start with. The Departments that want to use the conference
>>> room will put in their own codes and teh Phones will start working.
>>>
>>> Once the cll is done the phones can go to the initial state of no access
>>> or someone has to deactivate it..which ever works.
>>>
>>> This is required so that we can do a chargeback to the relevant
>>> department..
>>>
>>> Can you please suggest how to acheive in Cisco Conference Phones...
>>>
>>> Thanks in advance
>>>
>>> Gin
>>>
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090507/f3bbc9c5/attachment.html>