[cisco-voip] CUCM 7 under VMWare

Chris Ward (chrward) chrward at cisco.com
Fri May 8 09:01:36 EDT 2009


Samll correction...

 

I don't think we "block" upgrades with less than 80GB, but I do remember
them failing in CUCM 7. Perhaps something changed.

 

-Chris

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Chris Ward
(chrward)
Sent: Friday, May 08, 2009 9:00 AM
To: Philip Walenta; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CUCM 7 under VMWare

 

Hi Phillip,

 

It sounds like you didn't create a big enough HDD. I believe the
requirement is 80 although I thought we blocked the install in VMWare if
the HDD wasn't big enough. I believe the size should be 80GB. I believe
this works out to 2x 20GB active/inactive and a roughly 40GB
common(logging) partition.

 

9GB does not sound like enough for a common partition hence, I think you
need to specify a larger HDD size and re-install.

 

-Chris

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Philip Walenta
Sent: Friday, May 08, 2009 8:55 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CUCM 7 under VMWare

 

I just starting building a CUCM 7 system under VMWare.

 

It builds fine however it has one major issue.

 

The logging partition (all 9GB of it) is full.

 

Anyone run into this before?

 

How can I clear out this partition?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090508/385af43c/attachment.html>


More information about the cisco-voip mailing list