[cisco-voip] Sip Source Port on CUBE

[ccieid1ot]

Source port is always random.  TCP/IP 101


On Tue, May 12, 2009 at 5:27 AM, Ian MacKinnon
<Ian.Mackinnon at lumison.net> wrote:
> Hi All,
>
>
>
> Is there any way of binding the source port to 5060 for outgoing SIP calls
> in CUBE?
>
>
>
> I have tried
>
> voice service voip
>
>  sip
>
>   min-se 600
>
>   localhost dns:hostname.net:5060
>
>
>
> Thanks
>
>
>
> ________________________________
> --
>
> This email and any files transmitted with it are confidential and intended
> solely for the use of the individual or entity to whom they are addressed.
> If you have received this email in error please notify the sender. Any
> offers or quotation of service are subject to formal specification.
> Errors and omissions excepted. Please note that any views or opinions
> presented in this email are solely those of the author and do not
> necessarily represent those of Lumison and nPlusOne.
> Finally, the recipient should check this email and any attachments for the
> presence of viruses. Lumison and nPlusOne accept no liability for any
> damage caused by any virus transmitted by this email.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>