[cisco-voip] Sip Source Port on CUBE

[Baris Gulten]

I think like this.

 

voice service voip 

 address-hiding

 allow-connections h323 to h323

 allow-connections h323 to sip

 allow-connections sip to h323

 allow-connections sip to sip

 supplementary-service h450.12

 h323

 sip

  bind control source-interface Loopback0

  bind media source-interface Loopback0

  registrar server expires max 3600 min 3600

!

interface Loopback0

 ip address xx.xx.xx.xx 255.255.255.252 (real ip)

!

 

Or you can use fast 0/0 instead loopback 0

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ian MacKinnon
Sent: Tuesday, May 12, 2009 1:27 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Sip Source Port on CUBE

 

Hi All,

 

Is there any way of binding the source port to 5060 for outgoing SIP calls
in CUBE?

 

I have tried 

voice service voip

 sip

  min-se 600

  localhost dns:hostname.net:5060

 

Thanks

 

 

  _____  

--

This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the sender. Any
offers or quotation of service are subject to formal specification.
Errors and omissions excepted. Please note that any views or opinions
presented in this email are solely those of the author and do not
necessarily represent those of Lumison and nPlusOne.
Finally, the recipient should check this email and any attachments for the
presence of viruses. Lumison and nPlusOne accept no liability for any
damage caused by any virus transmitted by this email.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090512/8217e70c/attachment.html>