[cisco-voip] ATA 186 for Elevator - Voltage

[Matt Slaga (US)]

Definitely a great find, thanks Lelio!

 

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Bob Fronk
Sent: Tuesday, May 12, 2009 1:00 PM
To: Lelio Fulgenzi; Mike Lydick
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] ATA 186 for Elevator - Voltage

 

Nice!... Just had an issue with a fire alarm system complaining about voltage on an FXO port.  This might be my answer.

 

Bob Fronk

 

 

 

 

 

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Tuesday, May 12, 2009 11:44 AM
To: Mike Lydick
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] ATA 186 for Elevator - Voltage

 

ooops, cut/paste didn't work properly:

http://www.vikingelectronics.com/products/view_product.php?pid=294

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt


----- Original Message -----
From: "Lelio Fulgenzi" <lelio at uoguelph.ca>
To: "Mike Lydick" <mike.lydick at gmail.com>
Cc: cisco-voip at puck.nether.net
Sent: Tuesday, May 12, 2009 11:37:23 AM GMT -05:00 US/Canada Eastern
Subject: Re: [cisco-voip] ATA 186 for Elevator - Voltage

http://www.vikingelectronics.com/products/search_cat_results.php?mycategory=

you can add some voltage to the line. 

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt


----- Original Message -----
From: "Mike Lydick" <mike.lydick at gmail.com>
To: cisco-voip at puck.nether.net
Sent: Tuesday, May 12, 2009 11:29:20 AM GMT -05:00 US/Canada Eastern
Subject: [cisco-voip] ATA 186 for Elevator - Voltage

We are being told that an ATA 186 will not supply enough voltage for an Otis Elevator Phone Control Board. Anyone have any experience with using an ATA for this purpose. The Elevator tech is asking for 53vdc to program the control board (they call and have the program signal sent back over the line). We have moved the ATA within 10' of the controller board (eliminate line driver issues). I have tried modifying FXSOutputLevel but this is only modifies the Gain? Any other options for boasting the line voltage for an ATA?

 

 

 


Best Regards,

Mike Lydick


_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 


_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 



-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090512/7ce21cfc/attachment.html>