[cisco-voip] ATA 186 for Elevator - Voltage

[lelio at uoguelph.ca]

The Viking site has a lot of great tools. Reading through the list,  
you'll find some interesting products.

Lelio Fulgenzi, Senior Analyst
Computing & Communications
University of Guelph
519-824-4120 x56354

...sent from my iPod - please pardon my fat fingers ;)

[XKJ2000]

On May 12, 2009, at 1:53 PM, "Matt Slaga (US)"  
<Matt.Slaga at us.didata.com> wrote:

> Definitely a great find, thanks Lelio!
>
>
>
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net 
> ] On Behalf Of Bob Fronk
> Sent: Tuesday, May 12, 2009 1:00 PM
> To: Lelio Fulgenzi; Mike Lydick
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] ATA 186 for Elevator - Voltage
>
>
>
> Nice!... Just had an issue with a fire alarm system complaining  
> about voltage on an FXO port.  This might be my answer.
>
>
>
> Bob Fronk
>
>
>
>
>
>
>
>
>
>
>
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net 
> ] On Behalf Of Lelio Fulgenzi
> Sent: Tuesday, May 12, 2009 11:44 AM
> To: Mike Lydick
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] ATA 186 for Elevator - Voltage
>
>
>
> ooops, cut/paste didn't work properly:
>
> http://www.vikingelectronics.com/products/view_product.php?pid=294
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
> ----- Original Message -----
> From: "Lelio Fulgenzi" <lelio at uoguelph.ca>
> To: "Mike Lydick" <mike.lydick at gmail.com>
> Cc: cisco-voip at puck.nether.net
> Sent: Tuesday, May 12, 2009 11:37:23 AM GMT -05:00 US/Canada Eastern
> Subject: Re: [cisco-voip] ATA 186 for Elevator - Voltage
>
> http://www.vikingelectronics.com/products/search_cat_results.php?mycategory=
>
> you can add some voltage to the line.
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
> ----- Original Message -----
> From: "Mike Lydick" <mike.lydick at gmail.com>
> To: cisco-voip at puck.nether.net
> Sent: Tuesday, May 12, 2009 11:29:20 AM GMT -05:00 US/Canada Eastern
> Subject: [cisco-voip] ATA 186 for Elevator - Voltage
>
> We are being told that an ATA 186 will not supply enough voltage for  
> an Otis Elevator Phone Control Board. Anyone have any experience  
> with using an ATA for this purpose. The Elevator tech is asking for  
> 53vdc to program the control board (they call and have the program  
> signal sent back over the line). We have moved the ATA within 10' of  
> the controller board (eliminate line driver issues). I have tried  
> modifying FXSOutputLevel but this is only modifies the Gain? Any  
> other options for boasting the line voltage for an ATA?
>
>
>
>
>
>
>
>
> Best Regards,
>
> Mike Lydick
>
>
> _______________________________________________ cisco-voip mailing  
> list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> _______________________________________________ cisco-voip mailing  
> list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
>
> Disclaimer: This e-mail communication and any attachments may  
> contain confidential and privileged information and is for use by  
> the designated addressee(s) named above only. If you are not the  
> intended addressee, you are hereby notified that you have received  
> this communication in error and that any use or reproduction of this  
> email or its contents is strictly prohibited and may be unlawful. If  
> you have received this communication in error, please notify us  
> immediately by replying to this message and deleting it from your  
> computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090512/c972d589/attachment.html>