[cisco-voip] NM-HDA-FXS or EM-HDA-8FXS

[Go0se]

I believe that if they do not have the "/DID" designation in the card type
that they will not support DID mode. If you have the card(s) in a live
router you can verify by attempting to issue the "signal did {immediate |
wink-start | delay-dial}" command on one of the voice ports.

 

-Go0se

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Carter, Bill
Sent: Tuesday, May 12, 2009 10:36 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] NM-HDA-FXS or EM-HDA-8FXS

 

Do either of these support DID lines like the VIC2-4FXS/DID ?

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090512/ee0f0370/attachment.html>