[cisco-voip] Swapping an FXO card for a T1 card in a Cisco Router 2600

[ccieid1ot]

Steve,

Do a show diag and see what's on the router.  The only way a voice
card will work, without a NM module, on that particular model is
AIM-VOICE-30 or AIM-ATM-VOICE-30.  If you dont' have it, it ain't
supported.  Do a sh ver to see if you also need to upgrade to support
it.  It meaning voice.

On Tue, May 12, 2009 at 2:02 PM, Paul <asobihoudai at yahoo.com> wrote:
>
> According to this URL regarding 2600s...
>
> http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a0080094e92.shtml
>
>
> I see nothing in terms of VIC or VWIC slots. It sounds like you'll need an NM that supports VICs to be able to use that FXO card and furthermore have enough DSP resources to bring the card up.
>
>
>
>
> ________________________________
> From: Go0se <me at go0se.com>
> To: "Miller, Steve" <MillerS at DicksteinShapiro.COM>; Cisco VOIP <cisco-voip at puck.nether.net>
> Sent: Tuesday, May 12, 2009 2:21:17 PM
> Subject: Re: [cisco-voip] Swapping an FXO card for a T1 card in a Cisco Router 2600
>
>
> a)      Does your IOS support voice cards?
> b)      Do you have DSPs?
> c)       Is it a generation 2 wic in a generation 1 router?
>
> d)      Do some people call you the “space cowboy”?
> e)      Do some people call you the “gangster of love”?
>
> -Go0se
>
> From:cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On
> Behalf Of Miller, Steve
> Sent: Tuesday, May 12, 2009 1:05 PM
> To: Cisco VOIP
> Subject: [cisco-voip] Swapping an FXO card for a T1 card in a Cisco
> Router 2600
>
> Is
> there anything special I need to do in order to install an FXO card into a slot
> where there is currently a T1 card?  I shut down the router (a test
> router), removed the T1 card and installed the FXO, but the system doesn't seem
> to recognize it.  Do I need to reprogram something?  I am a total
> novice at routers.  Any help would be great.  Thanks.
>
> Steve Miller
> Telecom Engineer
> Dickstein Shapiro LLP
> 1825 Eye Street NW | Washington, DC 20006
> Tel (202) 420-3370| Fax (202) 330-5607
> MillerS at dicksteinshapiro.com
>
> --------------------------------------------------------
> This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s)
> named above. This communication may contain material protected by attorney-client, work product, or other
> privileges. If you are not the intended recipient or person responsible for delivering this confidential
> communication to the intended recipient, you have received this communication in error, and any review, use,
> dissemination, forwarding, printing, copying, or other distribution of this e-mail message and any attached files
> is strictly prohibited. Dickstein Shapiro reserves the right to monitor any communication that is created,
> received, or sent on its network.  If you have received this confidential communication in error, please notify the
> sender immediately by reply e-mail message and permanently delete the original message.
>
> To reply to our email administrator directly, send an email to postmaster at dicksteinshapiro.com
>
> Dickstein Shapiro LLP
> http://www.DicksteinShapiro..com
>
> ==============================================================================
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>